Bad Chad
Category
General Information
Locality: Canning, Nova Scotia
Phone: +1 902-582-3943
Website: www.hiltzautoco.com/
Likes: 190073
Reviews
Facebook Blog
We've decided that we're going to modify the seat we fabricated yesterday and remove the 2 inch shoulder "flare" to keep the same distance (17.5") from top to bottom. Watch the full video here: https://youtu.be/uNsG71rvcmM
The seats are being fabricated to fit Jolene. Yesterday we designed the frame work, now it’s time to sheath them with metal. Watch the process on www.YouTube.com/BadChad/videos
The seats are being fabricated to fit Jolene. Yesterday we designed the frame work, now it's time to sheath them with 18 gauge metal. Watch the full video here: https://youtu.be/JYSgI15mbzA
Tips, tools, and techniques for sanding auto body filler. Full video available on youtube (FREE): https://youtu.be/hZIwuo6TyqE
Today we are fabricating custom motor mounts. Watch the full (FREE) video here: https://youtu.be/qwn_AP9ih9Y
Well... dropping the engine on the car wasn't one of our goals yesterday but we thankfully overcame it and got the engine in https://youtu.be/0mG_YN8yi70
Now that the transmission tunnel is complete we can continue on fabricating the seats. Watch the full video here: https://youtu.be/YxdAQhWxgvc
Another day closer to primer https://youtu.be/j2q7BriyaOg
Transmission tunnel complete. Beaded, sheathed and welded. Form and function. Watch the process on www.youtube.com/badchad/videos
We thought we were buying a Ford 368 Y block yesterday but after we got it home and did some research it's actually a 430 big block. Now it's time to unload it and see if we have a two barrel or a 4 barrel FREE full video: https://youtu.be/a0Ab8lXECsc
It's time to see if this 1967 Jaguar 4.2L DOHC engine is going to fit inside the engine bay Full video available here: https://youtu.be/XbciAJAt7j8
Jolene is going to demonstrate how to mig weld sheet metal without causing any warping. Welding this way is not only effective but efficient as well www.youtube.com/c/badchad
Installing the 1967 Jaguar 4.2L DOHC engine today https://youtu.be/XbciAJAt7j8
New video premiering on YouTube now: https://youtu.be/bbLsv1e0U24
#BADCHAD starts now on Discovery Velocity
We went on a road trip today to look at a 1961 Austin Healey Sprite and this is what we can tell you about buying an old car www.youtube.com/badchad
The inner panel is repaired now it's time to fit the door back on https://youtu.be/3i2p3mqx5gY
Yesterday we showed how to remove, fabricate and apply a new outer door skin. Now that it's tack welded and fitting nice, it's time to take the door off and repair the inner construction FREE video available: https://youtu.be/hAbuOFzIr8U
New video available on www.youtube.com/c/badchad
Jolene is about to weld up where the running board meets the body of the car. Instead of bridge welding the gap, we are going to slide in a piece of round bar. This will fill the gap and connect the metal without causing too much heat www.youtube.com/c/badchad
Puling out a 1959 MGA roadster out of a basement that was burnt in a fire over 30 years ago....
Now that we have the outer door skin tack welded in place it’s time to take the door off and repair the inner construction FREE video available here: https://youtu.be/hAbuOFzIr8U
We really like Doug's 1967 Jaguar 4.2L engine but now it's time to measure whether it will fit inside the Bugatti engine bay. We met a lot of great car people this weekend and brought home some cool pieces of history www.youtube.com/c/badchad
This hand built metal working station is a simplified solution that could build you any car in the world. We would like to partner with Baileigh Industrial Holdings LLC to manufacture this metal working station. Let's ask our loyal followers, would you use something like this if it was available to you?
Today we are repairing the bottom of the door skin on the '40 Plymouth. We will show how to remove, fabricate and apply a new door skin https://youtu.be/wfN1BzJwtFY
We had to stop in and see Jim's freshly painted 1987 Ferrari Mondial
It’s Friday and we’re on the hunt for an engine for the Bugatti. What do you think of this 1967 Jaguar 4.2L inline 6?
We're here at our new friend Gerry's checking out his collection of British classic cars. We can't think of any better way to spend the first day of 2021 than with good friends and cool cars Watch the full video for FREE on youtube: https://youtu.be/n0B338ysMRw
We are about to push the creative boundaries a whole lot further as we rush to fabricate the front end, gullwing doors, and blow bubbles in the kitchen oven... all before the big reveal Tonight at 10p ET on Discovery
Let’s see what happens seems to be Bad Chad’s motto when it comes to building cars- and we would have it no other way! Watch a brand new season of #BadChadCustoms TONIGHT at 8ET | 5PT!
We got the '53 Oldsmobile dash mocked up in the '40 Plymouth yesterday but now it's time to scribe it to fit watch the full video for FREE on youtube: https://youtu.be/NxhTK0ZY_Q8
10 things you didnt know about Jolene https://www.tvovermind.com/jolene-macintyre/
This Plymouth Coupe has been chopped and lowered, the grill has been re-fabricated, and the rear fenders have been peaked Season 2 of #BADCHAD airs tonight on Discovery Canada at 8p ET #canada
We got the ‘53 Oldsmobile dash installed in the ‘40 Plymouth today. Watch the full process on YouTube here https://youtu.be/iTlIiyC8tns
O Canada #BADCHAD airs this Thursday night at 8p ET on Discovery Canada
https://www.saltwire.com//inspiration-the-name-of-the-ga/
The '40 Plymouth is in need of a dash so we're going to head outside and take the dash out of the junked '53 Oldsmobile https://youtu.be/ODE-v87A7Ls
It's time to discuss the interior details... garnish moldings, dash, gauges, interior.. etc. Geoff Webster is here today to discuss the dash and window trim details https://youtu.be/HSwfXjFA_54
How to fabricate a gas tank with no leaks the easy way
If you can imagine it, you can create it. www.hiltzautoco.com
It’s time to finish up the body work on the fender skirts. We will flood the fender skirt a second time using Everlast Z-Grip to fill pinholes and scratches. Once it’s sanded off, we will be ready for primer https://youtu.be/ZanCH6EjbRw
We are switching gears and going back to work on Jolene's Bugatti Make sure you subscribe to www.youtube.com/c/badchad to follow the build
Prestige Curvée has a scratch built chassis with the original Austin front end and a hair pin and coil rear suspension www.hiltzautoco.com
Once we have the fender skirt brackets mounted, we will be able to cut the fender skirts free from the car and we will have perfectly filled, fitted and mounted fender skirts (45 min video on https://youtu.be/0_QWHNWoMMc)
Test driving Prestige Curvée for the first time www.hiltzautoco.com
Another performance video from our time at Bad Chads place! This one is called, Tune-Up We made our annual trip to see Bad Chad! Things were a little differe...nt this year! Thanks for letting us make a racket right in front of HILTZ AUTO CO. New season of Bad Chad Customs, Mondays on Discovery. (If you are in Canada, dont panic, wait a week and the new episodes go on MotorTrend TV) Check out our tunes at... https://thegreenreflectors.bandcamp.com/ We have VINYL available!!! Were also on Spotify, iTunes and all that foolishness! Merch available at https://thegreenreflectors.threadless.com/ Modelling by Mae C. Funicello/ Vic Clark Photography Earthworks Audio Fender Zildjian Company Promark DAddario and Co. SURFS UP!
Prestige Curvée started as a 1953 Austin A40 Somerset Convertible www.hiltzautoco.com
2018 has been big but we're ready for bigger
Fearlessness is not the absence of fear but the willingness to walk into it. www.hiltzautoco.com
We'd like to wish everyone a very Merry Christmas https://youtu.be/-I806Is9HXg
It's time to get Bernie's wire wheels sandblasted for him. Bernie is the gentleman who we bought the Jaguar XJ6 from. Full video on youtube https://youtu.be/JR64tddBCwQ Season finale tonight at 8p ET on Discovery Canada
Fabricating rad hose adaptors the easy way Here are a couple tricks to use when hooking up your radiator hoses. Hot rodding isnt about what you can buy, its about what you can build
Wishing everyone a very Merry Christmas and a prosperous New Year
The fender skirts are now ready for body work. Watch the full video on https://youtu.be/8WKoUOnKpgY These fender skirts will be removable for those asking. We will show that process when we get to it
Jolene is going to weld up the fender skirt we made in yesterday's video. Once the fender skirt is tacked welded every inch apart, she will start laying four's and keep it cool by applying the air. This will prevent warpage https://youtu.be/QTmx0sSyQNY
Be undeniably good. www.hiltzautoco.com
Once upon a Pinto Coming up next... front end fabrication, gullwing doors, blowing bubbles for headlight lenses, and a whole lot more. Watch it all unfold Monday night on Discovery
In yesterday's video, we outlined the shape of the rear fender by manipulating 5/16" round rod and tack welding it in place. Today, we are going to sheath it with paper, make a pattern, then transfer it onto 18 gauge metal and tack weld it in place https://youtu.be/QPwvbbOcmn8
You will never influence the world by trying to be like it
To fabricate fender skirts on the Bugatti we will manipulate 5/16" round rod to fit the rear fender by tack welding it in place. Once it's outlined, we will trace the shape with paper and transfer it onto 18 gauge sheet metal https://youtu.be/RaAz1YPt27A
Fabricating fender skirts watch the video on www.youtube.com/BadChad tonight at 5p ET
Body work is an art. New video available https://youtu.be/6AFOMZPpYog
Creating a honeycomb-structured air diffuser, out of recycled metal from a shipping container, to maximize airflow Next up... gullwing doors from scratch, Monday night at 10p on Discovery
HILTZ AUTO CO. is here to prove that its not the size of the shop or the tool that builds the car To be continued... Monday on Discovery
Today we are fabricating the inner fenders on the Bugatti. We will be showing how we bead roll the panel and how we louver the panel using our handmade louver press www.youtube.com/c/badchad
BREAKING NEWS https://www.distractify.com/p/bad-chad-customs-girlfriend
Tonight at 5:30p ET on youtube https://www.youtube.com/watch?v=qDloDaorG5A&feature=youtu.be
This build is for a vibrant client who has a strong taste for Italian designs He owns a rare Lancia Stratos and is now commissioning a one of a kind HILTZ. To be continued.... next Monday on Discovery
The stainless steel mesh grilles are complete. Now It's time to do some measuring inside the engine bay www.youtube.com/c/badchad
Don't miss the season finale with Lightfoot & Wolfville tonight at 8p ET on Discovery Canada www.hiltzautoco.com
We are about to take on the biggest build of the season... tonight at 10p ET on Discovery
A car can be any shape you want it to be. Watch an all-new #BadChad Customs tonight at 10p on Discovery.
One of the distinct features on the Bugatti Type 57S/SC are the mesh grilles on the hood sides of the engine compartment. Today we recreated that look using stainless steel grate video on YouTube www.youtube.com/c/badchad
Tonight HILTZ AUTO CO. revolutionizes a 1971 Ford Pinto into a one of a kind, European inspired, performance concept car like youve never seen before Dont miss the two part episode of #badchad tonight at 10p ET on Discovery
It's official - we made the deal with our friend Doug and acquired the 67 Jaguar 4.2L engine that he has completely rebuilt. We did a bit of wheeling, dealing and trading... you'll never believe what Doug asked for on trade www.youtube.com/c/badchad
Whos ready to see what we build tonight? All new episode of BAD CHAD CUSTOMS tonight at 10p ET on Discovery
We got the Jaguar home safe and sound now it's time to wash it down and see what we have. This car has been stored in a basement for the last 40 years and it's just seeing daylight and soap for the first time www.youtube.com/c/badchad
Now thats a custom 1951 Mercury Sheer Passion built by Bill Reasoner
Now that’s a barn find... 1973 Jaguar XJ6 4.2L that has been stored in a basement for the last 40 years. Original paint with only 48,000 miles www.youtube.com/c/badchad
The Green Goblin was built out of a 1962 Chrysler and a 1974 Cutlass. Jolene wants to know what your favourite build of the season is so far and why? New episode of BAD CHAD CUSTOMS Monday night on Discovery
Customizing gives you a chance to do it YOUR way. We're leaning towards using the 305 engine we picked up the other day and customizing it to look like an Oldsmobile Rocket 88 www.youtube.com/c/badchad
Aluminum wheel spacers can become an unexpected and expensive obstacle when building a hotrod. Heres a simple and cheap trick of the trade that involves an old brake rotor with the same bolt pattern and a grinder New episode Monday night on Discovery
The hood sides on the Bugatti need to be stretched in order for the hood to fit properly so we are going to use a hydraulic porta power to move them into place https://www.youtube.com/watch?v=8ohG4AfjfrU&feature=youtu.be
THE CLASSIC HILTZ AUTO CO. SNAPBACK HAT $30 USD www.hiltzautoco.com
We picked up a running engine this morning for $100 now it's time to get back to work in the shop and fabricate some small patches for the '40 Plymouth that Jolene can weld in https://www.youtube.com/watch?v=3EtnQWixQwQ&feature=youtu.be
Fabrication process on BAD CHAD TO THE BONE Body built from scratch using 1936 Ford fenders along with utility trailer fenders
Very proud of the HILTZ AUTO CO. team for pulling off our first bike build. We pushed our potential as a shop to a whole new level designing, engineering and building on the fly #badchadtothebone
I think we found Jolene’s dream engine for the Bugatti... a 1967 Jaguar 4.2L www.youtube.com/c/badchad
BAD CHAD TO THE BONE built by HILTZ AUTO CO. Body built from scratch using 1936 Ford fenders along with utility trailer fenders
BAD CHAD CUSTOMS starts now on Discovery
Bugatti door panel and gap fitting videos available on www.youtube.com/c/badchad
It's Friday and we have the door gap on the Bugatti looking good. Tomorrow we are going to check out a potential engine; a 1967 Jaguar 4.2L XKE that our friend Doug has recently rebuilt www.youtube.com/c/badchad
This motorcycle build is gonna be all smooth sailing... right? Watch an all-new #BadChad Customs tonight at 10p on Discovery.
The proof is in the pudding with this product - high shine, extreme repellancy, with a glass-like finish. Very simple application, spray it on and wipe it off. We are looking forward to using Liquid Crystal on all future builds. And thanks to our friends at Gtechniq, they are offering 20% off to anyone that mentions BADCHAD20 at the checkout www.gtechniq.com #badchad x #gtechniqna
HILTZ AUTO CO. is about to switch gears and build a motorcycle youve never seen before Tonight at 10p ET on Discovery
#BADCHAD starts now on Discovery Canada
Today we made our annual trip to see Bad Chad! Things were a little different this year! Thanks for letting us make a racket right in front of HILTZ AUTO CO. !!...!!! New season of Bad Chad Customs, Mondays on Discovery. (If you are in Canada, dont panic, wait a week and the new episodes go on MotorTrend TV) Check out our tunes at... https://thegreenreflectors.bandcamp.com/ We have VINYL!!! Were also on Spotify, iTunes and all that foolishness! Merch available at https://thegreenreflectors.threadless.com/ Modelling by Mae C. Funicello/ Vic Clark Photography Earthworks Audio Fender Zildjian Company Promark DAddario and Co. SURFS UP!
Who wants to win a HILTZ AUTO CO. hoodie? Entering is simple... 1 - make sure youre following HILTZ AUTO CO. 2 - comment your hometown... Bonus entries for every time you tag a friend in the comments Worldwide shipping available www.hiltzautoco.com
One detail that can take a mediocre job to show quality is panel gapping. This process can become very time consuming. This is the quickest and easiest method for creating a perfectly even door gap www.YouTube.com/c/BadChad
On the hunt for the next project so we stopped in at our friend Andrews to check out what he has kicking around his shop. You just never know what youre going to find here. New episode this Monday night on Discovery
Now that all the welded areas have been skimmed with fiberglass reinforcement body filler it's time for automotive body filler. This is how and why filler is applied for show car finish www.youtube.com/c/badchad
There is more value in the process of building something than there is in the actual product itself. www.hiltzautoco.com
Today we are applying a rustproof and waterproof fiberglass reinforcement body filler. It will be applied over all welds for strength and durability. Here are two different ways you can apply fiberglass filler over welded areas www.youtube.com/c/badchad
We used a 1937 Dodge chassis with a 305 engine that had 37 original miles for the 1938 Ford Hotrod from Heaven Get ready for the next episode of BAD CHAD CUSTOMS Monday night on Discovery where HILTZ AUTO CO. builds a bike youve never seen before...
We are getting ready to prep the Bugatti doors for body work. First, we have to scratch up the surface with a D/A sander with 40 grit sand paper. This is to promote adhesion for the body work www.youtube.com/c/badchad
When it comes to welding up a car, it’s just as important to grind it right then it is to weld it right. Here are some tips for grinding off lap welds www.youtube.com/c/badchad
Fabrication process on the 1938 Ford Hotrod from Heaven
Freedom lives outside of the box www.hiltzautoco.com
HOT ROD FROM HEAVEN started as a 1938 Ford 2 door sedan built by HILTZ AUTO CO. All new episodes of BAD CHAD CUSTOMS Mondays on Discovery
Jolene welded this hood up one tac at a time to prevent warpage from overheating. Once we finish grinding the welds we will have a perfectly fitted one piece hood www.youtube.com/c/badchad
These '53 Oldsmobile headlights look like the perfect candidate for the '40 Plymouth Watch full video here: www.youtube.com/c/badchad
We found some headlights for the 40 Plymouth. Video will be available on youtube tonight at 5p ET. Oh yeah, it’s Friday www.YouTube.com/c/BadChad
An all-new #BadChad Customs starts now Discovery.
This episode is for all the hot rodders out there that take pride in building it YOUR way Rockabilly Weekend is a weekend dedicated to the hotrod/car community. Dont miss it tonight at 10p ET on Discovery
Today we are fabricating a two piece hood into a one piece hood and this is how we're going to do it. This method will give us the perfect gap along the cowl and the hood sides. It's a lot of welding but it will be worth it... here we go www.hiltzautoco.com
Hood sides are smoothed off and look great. Next up, we are going to be welding the two piece butterfly style hood together to make it a one piece hood. We will post a video tomorrow of how we are going to use the car as a 'buck' to manipulate the hood to fit. Stay tuned and thanks for watching www.hiltzautoco.com
We got the fountain sprayed with epoxy, now it’s ready for paint. Any suggestions on what colour it should be? www.hiltzautoco.com
This is a very simple and effective way of 'smoothing' out hood sides. This method will not only accomplish the right shape and design but it will also give the car more structural integrity Watch full video here https://www.youtube.com/watch?v=2mTfPUIrPB0&feature=youtu.be
This is what our Saturday night looked like
There's nothing textbook about building custom cars. To build a custom car you have to be able to take everything you've learned inside the box and apply it to what you're creating outside the box. Jolene was asked to 'custom' weld these running boards and this is why www.hiltzautoco.com
It’s Saturday and it’s time to sandblast this antique cast iron water fountain that we picked up last weekend on a trade Watch full video on youtube https://youtu.be/mxRJkvPp-lo
Today we are fabricating a set of running boards for the 1940 Plymouth using exhaust pipe, a cardboard pattern, 18 gauge metal, angle iron, a zip cut and a welder www.hiltzautoco.com
Got the first piece of the fountain sandblasted and the arms welded back on. Would anybody like to watch the sandblasting process on the next video?
To build a bike that stands out means we had to build a bike that stands out #BADCHAD is on tonight at 8p ET on Discovery Canada
Build a motorcycle in 15 days? Sure, no problem #BADCHAD is on tonight at 8p ET on Discovery Canada
There's nothing better than collecting and preserving history. Getting the sandblaster geared up to blast our new goodies we wheeled and dealed over the weekend www.hiltzautoco.com
Jolene is still welding up the 1940 Plymouth. Here are some tips for anyone who wants to learn how to mig weld sheet metal www.hiltzautoco.com
Popular Listings
Goclean
65 Jefferson Ave M6K 1Y8 Toronto, ON, Canada
+1 877-384-2460
Automotive, aircraft & boat, Product/service, Vehicle detailing service, Cars
Sergio Silva Brampton Mitsubishi
47 Bovaird Dr. W L6X 0G9 Brampton, ON, Canada
+1 905-459-2600
Automotive, aircraft & boat, Vehicle dealership, Vehicle shop
Mcknight / Airdrie / Carstairs / Crossfield / Cars Swap & Shop
2701 32nd Ave NE T1Y6J1 Calgary, AB, Canada
+1 587-582-4664
Automotive, aircraft & boat, Automotive, aircraft & boat