Century Hardwood Floors Ltd.

Not gonna lie, these 12"x12" 8 finger parquet floors are a bear to install. First the 2" inch oak boards(pic2) get ripped down to 1" and bundled into 8pcs (pic3) then get cut into 12" long bundles... halfway there. Now each square gets laid out and then adjustment pieces are put in to tighten up the floor(can't have loose squares). Now the fun begins... each square gets 16 nails down each end plus 10 nails down the center... that's 42 nails per square... this tiny repair was 50 squares so...2100 nails....2100 squeezes of the trigger. Good times. In the end after sanding an area slightly larger than the repair area, the blend was decent.

My floors pretty damaged... will it sand out? Yes, very likely

We are at the Home Show at the Canada Convention Center this weekend Come and visit us at booth 316 and say hi

We were brought in to re-sand the floor and stain to match the stairs. A previous company failed twice, the first time too dark and the second time too light and really blotchy. I would say we got the color pretty close

Come visit us at the Home and Garden Show at BC Place this week Feb 22-25

Custom herringbone install. 3 1/4" maple Sitefinished with Bona Traffic HD water based finish. Some of the challenges on this install were the 9 openings to the hallway making for a difficult planning of the border and the narrow field with 3 1/4" x 13" herringbone boards. ... Quite proud of the end result