GKL Fabrication & Design Limited

I couldnt help myself while waiting for my new replacement so I replaced the broken wire and replaced a hose and an o-ring and its working great with no leaks again. Now I will have 2 lol. #notgarbageyet

Also finished an instal of a water pump on this 9.8 merc. Next is the carburetor!!!

Just a little project done with Joe of FCA contracting to instal a wall fireplace and hang a TV along with the wiring.

Broken part for a customer that will take 1 week to get her so made one by hand again!!!!

For those that dont know what these are. They cut and wet the paper tape used to seal shipping boxes. This is an automatic version you just touch touch which length you need and its done

Good tip if you find your not getting either hot or cold water in your washing machine but faucets are on. First check for debris in the screen filter at the water valve and if its clean the valve needs to be replaced. This one was defective

Last machine fully disassembled cleaned oiled and knives sharpened ready to go back til next year

When you have thousands of cards to UV coat and its a manual feed machine you modify it to fit into a folding machine and viola!!! Its all automated

Friends daughters bike after a full clean and oil change, new clutch cover oring, mounting a rear trunk bag with lights and new control handles now ready to go

Removed the old flexible sump hoses and plumbed it all with abs for a more efficient and maintenance free system. Also has a battery backup.

Good to see all working well and another happy customer

System is all complete. Installed and working ready for Monday when they reopen. Total 9 machines and this big system done

Polar cutting system move from one adjoining unit to another and re-install. 1 more day to complete