Gratton Coulee Agri Parts
2 miles south on HWY 881 T0B 2H0 Irma, AB, Canada

Grouser 16FT 6 way blade that is currently set up to only function as a 2 way. The angle cylinders and hoses are removed, there are chains w/boomers in place of them now. The tilt cylinders & hoses are removed, there are steel plates bolted in place of the cylinders at the moment. Can be converted back to a 6 way if hoses & cylinders added or used as/is as a 2 way. Some cosmetic dings in the face of the blade. Cutting edge has been flipped already and has some wear on the cutting side now. No skid shoes or brackets for them. Has a nice, heavy duty silage guard. 44" frame mounting width, with mounts for Case IH STX375, STX380, STX430, STX450, STX500 Steiger tractors or Ford New Holland T9030, T9040, TJ375, TJ380, TJ425, of TJ450 tractors. May be missing some miscellaneous mounting hardware.

Degelman 14FT 6 way blade. The blade itself is nice, odd minor cosmetic ding, but it was used after the cutting edge was worn out and wore the frog a lot. Will need a new skid shoe on the left hand side (bracket is still there for it). Selling this blade as/is for $7500 with knowing the frog area will need to be redone and blade should have a new cutting edge installed. Mounts off an 8640 John Deere.

We recently got a 9790 Massey with duals in!

Paint is not great but the blade and mounts are quite nice. There are a couple cosmetic scrapes in the face. It does have the extra pin and bracket to the angle for manually angling the blade. Mounts are easily modified for different widths. Call us for more info...

Mounts and loader are very nice. The front piece of the loader frame that is used as the stand does have a large cosmetic bend, it does not affect anything more than looks. The 8FT bucket has a slight frown, the cutting edge is very worn and there is one small dent on the bucket end plates (each side). The 4 tine, dual cylinder grapple is very nice. There is some wear on the main top pivot pin areas (the lift arm pins, not the levelling arm pins). Loader assembly comes with mounts and joystick. This came off of a 6145 White Tractor.

Very nice 740 loader with some fire to the rear right hand side. The right hand mast & mount have most of the paint burnt off as well as the upper right hand boom area is burnt. Loader will need some right hand side hoses & the right hand side lift cylinder will need a seal kit (possibly replacement). All rear hoses will need to be replaced. Pins are very good & have never been repaired. The bucket has slight floor upward dents but a very straight cutting edge. The 4 tine grapple is good with some excellent repairs. Tractor has a grille guard.