Jacc Structures

Well this was an interesting one. A perfectly good garage sitting on a horrible thickened edge pad. Sides down up to.8 inches and pad badly broken. Do you tear down a good building and start again? Do you spend a lot of money and lift the building and redo the floor? No! We injected polyurethane foam and brought up the edges to level. Now the homeowner can cut out the pad inside and redo it. This time there will be rebar used.

Here is a video of the Luseland job

Continued the road trip and went to Luseland to correct a garage slab. The two front corners were down more than an inch. Voids were also found. All fixed. Another happy homeowner. Back to Nipawin....

A great week. This job in the Pierceland area on a remote access road was rather unique. A culvert was starting to wash out. Aqua dams were set in place to stop the water, water and muck removed. Some of the pics show voids going back approximately 15 feet. They were filled with rock then injected with AP 430 foam. Gabion baskets of rock strategically placed. This culvert isn’t going anywhere.

Well we have just finished a 5 day job at McLean Lake Mill in Northern Saskatchewan. We removed and replaced Polyurea floor coating. A good job to be done with.