Pats Mini H-Quad
Category
General Information
Phone: +1 519-495-9359
Website: patsminihquad.com
Likes: 804
Reviews
Facebook Blog
There is far too much misinformation and oversimplification about the situation in Venezuela. Trust me, it isnt that simple.
Jacob orange belt test.
https://www.facebook.com/groups/1659763170931110/permalink/1702476859993074/
Ok guys i want to do a give away to get out there the new frames and here is the list of frames: - The Micro 145mm 3" prop frame for now call the Tick - Acro-X... 175mm 4" prop for 1306 motors called Foggy - Acro-X 180mm RE 4 and 4.5" prop for 22xx motors - Misfit 180mm - Misfit 210mm with the camera mount (only one) - I have a 330mm frame with arms for 6" props designed to carry a GoPro, there is the latest version of this frame that can use arms for 8" props and carry a brushless gimbals What im looking for is a team of pilots that want to promote the hobby and the brand. All you need to do to participate is like us on Facebook, leave a video you are proud of ;) Cheers and good luck
The Rotorgeeks family is growing ;)
The T-Shirts are here http://patsminihquad.com/product/pats-mini-h-quad-t-shirts/
http://www.citynews.ca//video-drone-racing-puts-you-in-t/
Breakfast television http://www.bttoronto.ca/videos/4581858519001/
Grate work on the video Yuri :) https://youtu.be/9oIJhm9nV4M
Second batch of Minion PDB V2 are here lighter than before and with the filter active from factory :) http://rotorgeeks.com/index.php
The misfit is now available at rotorgeeks. http://rotorgeeks.com/index.php
Here is the light weight minion we are going to be testing, we have been calling it the BanniuK racing edition :D The idea here is to reduce more weight to make the frame more agile and increase the rate of acceleration. Needless to say Luke has some input on it, in fact some of the modifications he did to his minion are in this frame now.
We are thinking on a name for the 180mm frame and we cant make up our mind so we hope you guys can help here :) This are our suggestions: 1- Misfit 2- Bugger 3- Little bugger
The 180 is here :D Handles 4" props, 1806, 2204 / 2206 motors will fit in the arms. It weights 76g and for the second model in the picture which is just one for testing is 69g They will be available at Rotorgees
The all new 180 size frames is on its way :) I got a 210 size and I will be testing the BK racing edition of the Minion, here is a pic of one of the mods ;) Looks like we moved from 5" into 6" then we went down to 4" and back to 5" The three of them have their own advantage and picking the right one, depending of the course, will definitely provide an advantage. I guess time will tell which size will provide the best of the three worlds; I personally think the 5" will ...provide the best advantage. What do you guys think?
Here is the V2 of the 170mm 3" prop micro H-Quad I have 4 available if anyone is interested in this little bugger please contact me ;)
Here is the Red Devil Hybrid Minion :) now it will be easier to find it on the grass.
If anyone is looking for motor tilt here you can get some, courtesy of Mister Steele. http://www.hoverthings.com/flip-250-260-10-degree-motor-mou
Here is some more or better explained were to cut the jumper and where to connect the voltage reg. if you FPV gear cant handle 4s
WOW Mister Steele Nice flying https://youtu.be/SMlSN-EjLtU
We are back to the 314 prototype after all the suggestions and recommendations from the test pilots.
Oh look what i just got 1.5mm thick Minion top plates for Rotorgeeks and some very nice looking red g10 Hybrid Minions.
Finally i got time to put the hanger for the minion on my website http://patsminihquad.com/product/minion-hanger/
6" 4s Minion almost done :D Thanks Richard
Pats Y6 is here, i will have it on the website this weekend
Same Minion new look
The PDB is up on my website, Rotorgeeks also have them in stock and MQC should have them soon as well. Here is a little schematic i made to facilitate the installation and the link to the website as well. http://patsminihquad.com/product/minion-pdb-v2/
And the PDB are here, well the ones RG send me. The 80 that are missing are sitting in the mailbox here in my complex but i cant access them because the mailman forgot to leave me the keys :@ you go figure he left me a note on my mail today so my wife left him another bote so lets see if the guy clue in and leaves the key for it tomorrow.
Ok i finally got the new bobbins, i have them specially made to be softer than the rubber ones. This are silicon bobbins
Ok guys here is an update on the do waited Minion PDB: There was a confusion with the BOM from the pdb v1 and v2 that led to delays :( the board is almost ready but is missing a couple of components, it will take them 2 days to get the missing inductor and capacitor an one day to hand solder them, then they will ship. Here is a picture of the PDB V2, notice the missing components.
I am trying to find a place were to put my minions and came up with this bracket. I will be able to hang my frames on the wall taking them from occupying space on my desk.
My 3D printed parts are here Thanks Richard
Something is cooking ;)