Scarborough heating and air conditioning

1. Furnace Quality The most popular brands are generally classified into three quality categories. We’ve put brands made by the same parent company in parenthesis to avoid confusion as you shop brands and get estimates: Budget brands (lowest cost, 12 to 15-year durability): Examples are Payne, Airtemp, Aire-Flo, Ameristar and Goodman... Standard brands (moderate cost, 15 to 20-year durability): Examples are (Rheem and Ruud), (Heil, Arcoaire, ComfortMaker, Keep Rite and Tempstar), (Armstrong and Ducane), (Luxaire, York and Coleman), (Maytag, Broan, Westinghouse, Tappan, Frigidaire and NuTone), (Daikin and Amana) Premium brands (highest cost, 20 to 25-year durability): Examples are Lennox, (Carrier, Bryant and Day & Night), (American Standard and Trane) In most cases, sister brands have identical furnace lineups with different branding. These furnace lists from the Rheem and Ruud sites show that the model designations are the same except for a U for Ruud models and an R for Rheem furnaces See more

Common Heating Mistakes to Avoid During the winter, you want to make sure your heating system is running at optimal levels. There’s nothing worse than losing heat when the Metro East’s temperatures are at or below freezing. Here are a few common heating mistakes to avoid that will keep your system running smoothly and save you money. Don’t Crank Up the Thermostat... This is one of the most common mistakes when it comes to heating a home, and in reality, it’s inefficient and can be detrimental to your heating system. Many people mistakenly believe that cranking up the thermostat will heat up your home faster. But in reality, if you turn up the heat 10 degrees or 20 degrees, it’s still going to take the same amount of time to warm up 10 degrees. There’s no need to force the system into overdrive because this can lead to unnecessary strain. Don’t Set the Temperature Too Low at Night Any extreme temperature can be hard on your heating system, so while you should avoid cranking up your heat, you also shouldn’t turn it down too much at night. Turning it down a few degrees can help save money, but if you let the house get too cold in winter, you risk the chance of your pipes bursting. Energy.gov recommends turning heat down 8 degrees for at least 8 hours in order to save money on heating bills. Any more than this can cause problems and prevent a good night’s sleep. Don’t Let the Heat Run Constantly Sometimes it’s easy to forget to give your heating system a break. Lowering the temperature when you’re at work not only saves money, but it’s also beneficial to the system. Just remember not to let the house get too cold (see #2). Some thermostats can be set to a lower temperature during the day when you’re out, and then automatically heat up by the time you get home. Do Open Your Curtains on Sunny Days Letting sunlight in through the windows is a great indirect way to heat your home. Why make your heater do all the work when Mother Nature can chip in? Making sure the curtains on south-facing windows are open is especially effective. Do Lock Your Windows This mistake may not be as obvious, but it’s a good one to remember. When you lock your windows, you seal them off from the outside. Simply shutting your windows isn’t as effective as making sure all of them are locked and sealed, preventing cool air from leaking into your home.

WiFi thermostat only $34.00 at home depot after $75.00 rebate https://smartrebate.enbridge.com/

Programmable Thermostat Install a programmable thermostat and save up to 10 percent per year on your utility bill. The Department of Energy recommends setting t...he thermostat to dial down the temperature 7 to 10 degrees for at least eight hours a day while you're out or sleeping. With a cheap programmable thermostat that costs about $40, you can reap the payback within months See more

Air Conditioner Maintenance Tips There can be a lot of ways to increase the efficiency of your AC unit. Find out more by reading this. With our summers being ho...t and sticky, it is important to ensure your air conditioner is running as efficiently and effectively as possible. Here’s what you can do to beat the heat and to ensure your equipment runs at its best. 1. Get your air conditioner inspected at the beginning of the season. Bringing in the pros for an AC inspection at least once a year will give you the confidence that it’s in good working order before you need to turn it on. Remember, failing to maintain your equipment can shorten its lifespan and possibly lead to premature failure. 2. Clean or replace furnace filters. Clean or replace furnace filters every three months, even in the warmer weather. Clogged filters mean that your furnace motor will potentially work harder and use more energy. 3. Clear area around condenser unit. With most air conditioning systems, the condenser unit is located outside the home and is prone to accumulate debris in the area surrounding it. Remove debris and cut any grass or weeds around the unit that could be obstructing airflow from the condenser fan. Consider these additional cooling tips: Ensure you remove the winter cover from the air conditioning unit before you turn it on for the first time. Leaving the cover on could lead to much bigger problems. The outdoor unit needs to release warm air. If unable to, it can overheat and potentially breakdown. Reverse the direction of ceiling fans so that they spin counter clockwise blowing straight air down. This will help redistribute the warm air trapped near the ceiling making the room feel cooler. Close blinds and drapes on all south and west facing windows when leaving the house during the day. This really helps to keep the home cool, minimize the amount of time your air conditioner actually comes on when you are not home and, can help reduce your energy bills.

Mistakes You're Making With Your Air Conditioner You Aren’t Changing or Cleaning Your AC Filters At a minimum, you should be changing the filter on your central AC unit once every three monthsand as often as once a month if your system is running all the time.... Neglect this chore, and a dirty filter can lead to poor air flow or freezing up of your unit’s evaporator coil, says James Braun, a professor of engineering and director of the Center for High Performance Buildings at Purdue University. A filthy filter could add 5% to 15% to your AC bill, and will shorten the lifespan of your whole system. Fortunately, replacement filters are pretty cheapusually less than $10. If you have ductless split AC units, there should be a removable panel on your unit that will allow you to wipe off the filter with a ragno replacement necessary. You’re Not Having Your System Serviced Annually You could look up online video tutorials about cleaning your AC unit’s coils and finsnecessary maintenance operations that keep your system up and running efficiently, Braun says. You could also bring in a pro to service your system once a year. The U.S. Department of Energy offers some tips when searching for AC service contractors.

Finding the Right Contractor Determining which contractor to work with doesn't have to be an intimidating process. There is a great deal of very helpful information available online, at websites which specialize in connecting homeowners to contractors and other workers. You can research a contractor's work history, their licensing and insurance and, in some cases, read reviews written by former customers. These first-person reviews are extremely helpful in making your decisio...n, since you're allowed a glimpse of what the contractor's work is actually like, from somebody who's experienced it first-hand. It's always best to choose a contractor who has experience in the field. If you're planning on installing a state-of-the-art combined hybrid system with separate controls for each room in your home, try to find a contractor who has experience with more than just old-fashioned, gas-powered furnaces. It's always best to talk to several different contractors who meet your specifications, and then make your decision based on who you feel the most comfortable dealing with. Posted by: TrustedPros

We have a lot of problem lately due to these new high density air filter(to much restriction), causing the high limits to malfunction in the newer furnace.

http://www.grayfurnaceman.com/-ifc-failure-codes.html codes for furnaces

If you have a Carrier, Bryant, or Payne furnace between 5 and older there are heat-exchanger problems which the parts are covered (up to twenty years) by the m...anufacturer and its available next business day. Don"t be fooled by some company saying it can take up to two weeks to get the part. We charge between $400.00 to $ 500.00 to do the job See more

Turning on the bathroom fan when showering can help combat humidity and heat buildup

When Should You Replace Your Unit? Replacing all or part of a heating and cooling system can be a big investment. When an older unit has continuous issues or shows signs of reduced energy efficiency, it could be more economical to upgrade your home comfort system. A Tempstar dealer can help you diagnose your heating and cooling system, as well as help you choose a replacement that fits your needs and budget. Here are some reasons for replacing your heating or cooling unit: Th...e cost of repairs is near 50% of the cost of a replacement The unit requires frequent repairs. Humidity problems that signal operating issues Warranty expirations High dust and low air quality problems The furnace is more than 15 years old, and the heat pump or AC is more than 10 years old See more

When Should You Repair Your Unit? When your heating and cooling system is working properly, your home is comfortable and you’re probably not experiencing any significant increase in your monthly utility bills. So when a part malfunctions or your unit stops working, how do you decide if it’s time to repair or replace it? Your local Tempstar dealer can provide a thorough diagnosis of your system and make a professional recommendation. To help you decide, we’ve put together a l...ist of factors to consider. Here are some reasons to repair the unit: The cost of repairs is less than one-third the cost of a replacement The unit is less than 10 years old The unit is still under warranty (see your warranty terms)