SGT Blades
Mountain Circle T4A 1X6 Airdrie, AB, Canada

We have an extra arming sword trainer on hand, 325 plus shipping.

Todays sale item.... zombie hawk, 5160 blade, hickory handle, $125. sale price is $75. valid until the next item goes up for sale.

todays deal Falcatta, 5160 blade with pinecone and resin handle, $600 canadian. 25" overall with 19" blade, pob is 4" in front of the handle. 50% off so $300 canadian and this awesome shortsword is yours!

One of my most treasured gifts ....a set of leather stamps... what makes this extra special is that 95% of these are hand made from nails and spikes.

Happy new year!! to start this year off right every day or couple days we will have one of our currently available pieces on sale!! Todays special is basic Katana, hardwood handle, 5160 blade, Sharp! REG.... $600 can. 50% off so.... $300 can. this price is valid until the next item goes on sale

Paper cut on a rolling paper

The falcatta didnt perform as well as i thought. It was a bigger deer, thicker neck, and i hit right at the base of the skull. So operator error??

Playing around with test cutting

With the falling canadian dollar.. costs have gone up and I have to pass these on to you. PM me for custom pricing. Note warranty is 6 months on trainers. These are current prices as of june 2020. Messers $350 Canadian Arming sword $350 meyer rapier $450 gymnasium sabre $400... polish sabre $425 Feder $500 montante $650 See more

hate to say it, but Christmas is just around the corner, if you need/want something now is the time. We have some stock, we can provide gift certificates if you dont know exactly what to get, and we offer lessons in blacksmithing and knifemaking, and can provide a gift certificate for those as well.

Testing the katana

Testing the persian shamshir, did better than i expected for such a light sword. Pretty sure it would have been perfect but i tagged the deer leg

Testing the spike on a railroad spike war hammer. The twisted spike looks cool but makes it tricky to pull it out.

Tyrel decapitating a deer with his longsword Easy....

Revised friction folder. 1075 blade olivewood handle.

Friction folder prototype. A first for me, i have wanted to make one for years. 1075 blade with poplar handle. If everything seems right i will be doing some nicer versions.

This year is at an end and i want to thank everyone for their support and encouragement. May this next year be bigger and better.

working on a project that i first thought of almost 20 years ago... not quite what i originally envisioned but will be cool none the less. 35" blade and cobra skin is all im gonna say till its done. still trying to figure out how it will all come together...

Trying a new wood. Mango... ehhh its ok

Little hammer from a rail road spike ... just because

Thank you all for your support this year!

Christmas is just around the corner. cant get anymore custom work done before, but, we do have some stock, knives, swords and hawks. Gift certificates are available so that special someone can choose their own style and materials. We also do certificate for lessons. What is all involved in the lessons? The 2 day class.... Day one, we start on an antique coal forge, covering coal, where to get it, the different hammers, hammer control and techniques. We forge the knife to shape, forge bevels, learn about moving the steel, the different types of steel, blade design, and some basic grinding. Day 2 we switch to the propane forge, covering the advantages and disadvantages of both types of forge. We heat the oil and each student heat treats their own blade, then on to tempering, after that it handle fitting, and we go over the various handle materials and advantages and sources. Then is cleaning up the blades, fitting handles, more clean up and sharpening. Each student goes home with a knife they made from scratch. That they built themselves. gift certificates are available for lessons, give the gift of knowledge and steel! See more

love it when a previous customer stops in to pick up more sharp pointy things! and he brings his original purchase from 3-4 years ago to show use how it held up. Blade had the expected wear from use, but the handle was mint!! Super glue finish holds up well!

Work horse kukri with a fabulous screwbean mesquite handle and some blue sparkle resin

Mini axe waiting for a sheath. Awesome maple with a touch of green resin for the handle

Computer isnt working properly, cant access emails till its fixed

Hunting spears and quiver finished, ready to be picked up.

Christmas is soon, we have some stock on hand, and we can do gift certificates for product or lessons. Give the gift of steel and / or knowledge this year!

Currenty available, mini axe 5160 blade, paracord handle, 6" long, $75 canadian

Railroad spike walking stick done and gone

Custom olivewood hunter done and ready to go

Little mini axe done and heading out soon.

Hunter finished, 1084 blade with camo handle currently available

Another rough forged skinner. 5160 blade, maple burl handle, open to offers if your interested

Finished up a couple rough forged beater knives. 5160 blades, birch handles with walnut oil finish

pairing knife, 01 blade with acrylic handle. $125

stuff i have on hand

Black friday/ pre christmas sale!!! 25% off all instock products!!! check the currently available album for our in stock pieces. offer ends Monday.

Earlier i showed how a fuller increases the flex of a blade. Today i am showing how a hollow ground blade also allows more flex. 1st pic shows the flex of a bar of 5160 1/4" x 1" x30" with a 1 lb weight at the tip second pic is the same bar with a distal taper Third pic is the same bar with hollow ground bevels.... FULLERS AND HOLLOW GROUND BEVELS DO NOT ADD STRENGTH, THEY DO NOT ADD STIFFNESS See more

Just finished a scabbard for a dussack. Cowhide dyed black, with a gorgeous python inlay, hand stitched with silver thread

Ice block cutting with a kukri

Loosely based on the oakshott type xviiib. Heat coloured guard and pommel with a stingray skin wrapped handle. 34" 5160 blade, balance point is 5 inches and weighs only 3 pounds

In light of current antics in the overall sword community i wish to clarify a few things. 1. We do not condone or support discrimination of any type. Period. 2. We do not get involved in inter-club disputes or disagreements....period.... 3. Our passion is swords and knives and all of our customers share that passion to some extent.

what was supposed to be a quick stress relief project turned into a stress inducing project but its done. 1075 blade, elk antler handle, The Yakutian knife (Yakut: саха быаа, Russian: якутский нож), sometimes called the Yakut knife, is traditional knife of Yakuts (an ethnic group from the Sakha Republic (or Yakutia), region of Siberia), used for working with wood, hides, skins, fish and meat or for combat. The knife has been used in Yakutia for hundreds of years without ...significant changes in its design.[1] Typical Yakutian knives have a blade length of 47 inches (1018 cm), and 11 12 inches (2.53.8 cm) wide. An unusual feature of this knife is that the blade is asymmetrical; one side of the blade has a fuller, that is a groove in it and a chisel grind, while the other side has no groove and is basically a convex edge (meaning it rounds down to the edge, rather than having a straight bevel)

I have seen people say that a fuller lightens the blade while maintaining the stiffness. Even a shallow fuller will increase the flex. 2 pics one before fuller and one after.

Wip, 1st pic is current projects the rest are waiting patiently

is there any interest in my hosting a micro show/open house so you can check out the shop and the stock i have on hand? comment below if your interested

Orcish war hawk . 15" long 4" blade, elk antler handle. Hand forged from 5160 bar stock, the hammer marks and scale left for a rugged look, the aged elk antler really stands out. Currently available

another random sword pic

another random antique sword pic

Random sword pic from my stash of antique swords pics

New bowie done 5160 blade, cable damascus guard and buttcap, Cholla cactus and resin handle Currently available

Small kitchen cleaver done. 5160 blade, olivewood handle. Currently available

This sexy little paring knife will make the other kitchen cutlery jealous... O1 blade with acrylic handle. Really hard to take a good picture. Currently available

Flexing a 5160 blade 59 Rc. 1/4" thick at the spine

Pounding the blade between the railroad ties and standing on it

5160 blade vs mild steel round bar. Blade took damage due to thin profile for this application

Swordwind done.. going out today custom dye with twisted wire wrap

Zombie hawk done, currently available $150 can.5160 blade, hickory handle

excellent kitchen knife or even for edc, 6" overall this has an O1 blade with rose n gold resin handle, $150 can sheath is extra

5160 blade with birch handle and pyrography. $175 can sheath is extra,

medieval warhawk, slotted handle with pinned collars and hand carved walnut handle, $250 can

war hawk, forged from W2 round bar this has a factory hickory handle for easy replacement. $250 can

basic Katana, hardwood handle, $600 can