Walls Rod and Custom
Hwy 206 South, Lot 51126 R0A 0J0 Lorette, MB, Canada

We would like to wish everyone a Merry Christmas and a happy new year, from all of us at Walls Rod and Custom.

Time for dyno pull final numbers 535hp to the tires

Warming up on the dyno

This was a fun project we had at the shop had a sbc with spray now it has a GM crate motor 454 lsx

Hate to see her go, but love to watch her leave. She’ll be back. Ain’t done yet! Stay tuned.

Built a little something different this summer, well actually it’s quite large. 2017 Longhorn 10 BDS 4 Link Lift Custom Fox Shox With Reservoirs... Dual Shock Hoops BDS Dual Steering Stabilizers BDS Adjustable Track Bar 5 Flopro Exhaust Amp Research Power Steps 24 American Force Wheels 40X15.50X24 Fuel Gripper M/T See more

2016 Stingray. Came in for stainless works exhaust. Headers, tuning and a few other goodies!!

Customer stopped by with this gorgeous 2017 Ford F-350 6.7L diesel Platinum edition with only 216km on the odometer and he wanted to add some subtle changes to the truck. So we hooked him up with a Fabtech Leveling Kit front and rear. New rims and tires are next!! #wallsrodcustom #youronestopdieselshop #ford #diesel #boosted #fabtech

On behalf of the staff at Walls Rod and Custom, we hope you had a wonderful Christmas. Have a safe New Years Eve. Please don't drink and drive. Call a friend, Cab, Tow truck whatever you need. Happy New Year!!

2007 Dodge 2500 in for some Dynatrac spin free hubs the other day. Customer was looking for some extra fuel mileage. See what the results are.

Customer complained of a squeak in the engine. Truck ran pretty good otherwise. Lifter decided that cam lobe wasn't needed anymore. Found 5 bad lobes in total.

Another E-350 van in for some work, this one needing some injectors and a hard start issue. 06 E-350 6.0L.

Old girl came in with some running issues, had her fixed up in no time!! Keeping the old trucks running great, and this one was clean!!

This what happens when your in the throttle to long and EGTs get way to high!! It actually warped and bent the pipe!

It's amazing how much carnage can be created by a faulty installation. Customer had a u-joint replaced by another shop and was installed improperly. Needless to say it's time for a new upgraded North American Diesel Performance (NADP) transmission and a few other upgrades while we're in there. #wallsrodcustom #wallsrodandcustom #napc #nadp #carnage #dodge #diesel #boosted

Pulled this 6.4 Ford down for a tick, ended up finding 3 bad lifters. So while we're here, upgrades!! 110hp nozzles, fuel bowl delete, dual fueler, and a billet 59mm high pressure vgt! This thing is going to lay it down!!

Here at Walls we can do just about anything. Take for instance, we just finished a full Air ride system with rear 4-link for this customers 2007 dodge 3500. Now he has full adjustability of his suspension for any size load he wants to haul plus a comfortable ride for those long hauls. #wallsrodcustom #wallsrodandcustom #diesel #boosted #bagged

2007 duramax in for a FASS fuel system 150gph pump and draw straw. Help keep the cp3 and injectors fed with clean fuel.

Get Your Heavy Hauler from us today! Quick turn around, stocking all units. Chassis dyno proven.

The owner of this gorgeous 2015 Challenger Hellcat stopped by for a dyno session this morning. Such a badass car! Laid down 643rwhp to the back tires!! Not bad for a 4000lb street car. #wallsrodandcustom #wallsrodcustom #dodge #challenger #hellcat #mopar #boosted

Went up to gimli diesel drags, ended up getting rained out, but still made a few passes with the trucks. A good customer and friend of the shop ended up taking his compound turbo, 1000hp truck down the track. We need to finish fine tuning it but we couldn't be more happy for how this build turned out.

2013 Camaro ZL1, customer came in wanting some more power out of this already awesome beast. So we hooked him up with Lingenfelter 650Hp upgrade package, which includes larger injectors, smaller supercharger pulley,under driven crank pulley and cold air intake kit. All parts installed in house. Just finished dyno session with it and very pleased with the result. Made 582Rwhp/529torque!!

2010 Cadillac CTSV, customer came in for a power increase so we hooked him up with a Pulley upgrade, bigger injectors and custom tuning!! Put down 587hp/561tq to the back tires. Huge increase over stock. Gotta say this is one badass family hauler. #wallsrodcustom #wallsrodandcustom #lingenfelter #cadillac #ctsv #boosted #gmperformance #supercharged

It's almost time!! Time to make some power!! Come on out for great day, hoping the weather holds out!

Have a great May long weekend from all the staff at Walls Rod and Custom!! We know this customer will with his badass 2016 GMC Denali Duramax we just finished. Supplied and installed 6.5" BDS lift, 20" KMC rockstar wheels wrapped in 35" duratracs! Finished it all off with a set of bushwhacker flares and step back mudflaps! Also did a single 5" flopro exhaust system and custom tuning! Come see us for all your diesel repairs, upgrades and custom tuning! We'll be sure to hook you up! #wallsrodcustom #wallsrodandcustom #bds #bdslifts #kmc #rockstars #goodyear #duratracs #bushwhacker #flopro #efilive #duramax #diesel #GMC #boosted

Spring is over and summer is rolling in, and with that the nice cars come out to play!! All these beauties have come in for upgrades and all of them are supercharged!!! From the left to right, 2010 Cadillac CTSV, 2015 Corvette Stingray, 2010 Corvette Grandsport, 2003 Corvette and a 2013 Camaro ZL1!! Which one would you take for a ride? Who says we don't have a little fun around here anymore... #wallsrodcustom #wallsrodandcustom #procharger #corvette #C7 #C6 #C5 #camaro #zl1 #cadillac #ctsv #boosted #supercharged #summerfun #youronestophorsepowershop #2500hp

Finished up another procharger install and got the tuning done!! Here is the end result. 509rwhp/466torque!! Pretty good numbers for a bone stock application. Another very happy customer. #wallsrodcustom #wallsrodandcustom #procharger #sct #corvette #c6 #vette #500hpclub

Gonna be a busy week here at the shop!! This 2010 Cadillac CTS-V came in for supercharger pulley upgrade as well as some other goodies!! Stay tuned to see what kinda numbers this one lays down on the dyno!! #wallsrodcustom #wallsrodandcustom #cadillac #ctsv #lingenfelter #650hp #boosted

Got a chance today to finish up some final tuning on this 2015 Corvette Stingray with a programmable ratio supercharger from Procharger and put it on the rollers for final dyno runs!! This new LT engine series took some work to tune properly but we got it!! She runs great, sounds great and drives even better, not to mention the awesome increase in power. Picked up 140HP to the tires over stock! We'd have to say this upgrade was definitely worth the investment. This customer will definitely enjoy HER new setup! GIve us a call and we can work some magic on your ride 204-878-4321 #wallsrodandcustom #wallsrodcustom #procharger #corvette #C7 #stingray #vette #boosted #gmperformance #chevrolet

2010 Corvette Grandsport procharger first fire up vid of the procharger installed!!! Love the way that blower whistles!!! Stay tuned for Dyno video #wallsrodandcustom #wallsrodcustom #procharger #corvette #grandsport #chevy #chevrolet #LSX #LS3 #boosted #supercharged #gmperformance

2010 Grandsport corvette, customer also requested to install this ingenious little item. HIDEAWAY license plate!! This is a great purchase for all you guys/gals who hate the look of a front plate but also hate tickets! #wallsrodandcustom #wallsrodcustom #altecproducts #corvette #grandsport #chevy #chevrolet #LSX #LS3

Procharger installed on this 2010 Grandsport corvette!! Time for fire up!! #wallsrodandcustom #wallsrodcustom #procharger #corvette #grandsport #chevrolet #chevy #gmperformance #LSX #LS3

It's been a busy week here at the shop! Two trucks down to bad fuel, fuel leaks, plus found some very dirty air filters!!

Come on out!! Should be a good day!!

2010 Corvette Grandsport LS3 this on is also in for a procharger, custom tune and some dyno time!! Can't wait to tear into this one. #wallsrodandcustom #wallsrodcustom #procharger #chevrolet #corvette #C6 #vette #boosted

Got a little side tracked this week with some other jobs but was able to get some work done on this gorgeous corvette!! 2015 Z51 stingray, installing a Procharger i-1 programmable ratio supercharger!! One of the first ones sold in Canada for an 8spd automatic C7 vette!! This things gonna be badass when it's done!! #wallsrodandcustom #wallsrodcustom #procharger #i1programmable #c7 #vette #corvette #lt1 #boosted #gmperformance #chevroletperformance

Had the pleasure this morning to dyno mark from SPEEDWORLD 's race car to get it ready for a summer of fun!! Pretty impressive little car, it's sporting a 2.0L turbo ecotec which laid down an impressive 330rwhp and 337ft/lb torque!! All that power packed into a 1750lb chassis, should be a blast!! #wallsrodandcustom #wallsrodcustom #speedworldindoorkarting #speedworld #ecotec #boosted #gmperformance #chevy #racecar

Here's a little pre-upgrade dyno video for everyone to enjoy. Can't wait to see what it makes after we're done with it. Bone stock it laid done 408rwhp/409torque. Pretty impressive numbers!! #wallsrodandcustom #wallsrodcustom #corvette #stingray #c7 #vette #procharger #gmperformance

Yes we still work on the older diesels! Upper valve cover harnesses and two injectors for this 02 7.3 Powerstroke. Gotta keep the old ones running!!

This stunning 2015 C7 Stingray dropped by for an upgrade..... Stay tuned to see what's in store for this vette!! #wallsrodandcustom #wallsrodcustom #chevrolet #C7 #corvette #vette #procharger #gmperformance #stingray

Turbo preliminary piping tack welded. Rad fitment, intercooler fabed to fit. Cab fitment next.

Endless hours of custom piping. Big flow, big hp, low Egts. Suspension on front close to complete, wheel speed sensors for traction control. #wallsrodcustom #750bigjob #wallsdieselperformance #youronestopdieselshop

The start of the cool stuff. Compounds, motor fitment and getting ready for all the custom fabricated - 304 stainless piping.

More water cut components. Upper control arms, welded and temporary installed.

Water cut plate, jigged up and install in house designed IFS. Much more pics to come over the next few days. #wallsrodcustom #bigjob750 #wallsdiesel

Just finished install of this 6" fabtech lift kit with a set of 35" toyo open country tires and WORX custom rims on this 2016 Z71 Silverado. Looks killer! Another satisfied customer! #wallsrodcustom #fabtech #toyo #worx

Custom set of alcoas, milled and finished. Frame cut for drop. Set the tanks for heights, start to setup the stance. #wallsrodcustom #1500hpratrod #customalcoas #customfab #750bigjob

Stripped down and getting ready for all the custom suspension work. #wallsrodcustom #f750bigjob #1500hpratrod

In celebrating our 20th year in Buisness, we are building a shop tow vehicle. 1953 ford f750 Big-job. We're doing it in the typical "walls style rat rod". big hp, slammed on air, duramax with compounds. Custom 24 inch semi wheels, all in house built and designed. Over the next few weeks, progress pics to come!!!. #wallsrodcustom #1500horsepower #wallsratrod #bigjob #compounds #bigduelly

On behalf of the staff here at Walls Rod and Custom. Have a Safe and Very Happy Easter!! Have a great day!!

The 1970 Monte Carlo is Up and running!! Sounds real good, sorry for the shaky video. #wallsrodandcustom

Recent shop project we just got running. 1970 Monte Carlo originally equipped with a Small Block Chevy. Customer wanted a little more power and wanted to switch to big block. So we supplied and installed a Chevrolet performance ZZ454/440hp, Chevrolet performance serpentine system, Griffin 4 core aluminum radiator with dual electric fans, Hooker ceramic coated headers, Flowmaster 3" H-pipe dual exhaust system. Topped it off with a QFT 750 street series carb, MSD hei distributor and plug wires!! Fired right and runs amazing! Now time for the dyno. #wallsrodandcustom #hookerheaders #gmperformance #chevrolet #qftcarbs #flowmaster #msdignition #griffinradiators #holley

2006 Ford E-450 6.0 diesel van in for a no start. Found high pressure oil leaks. New stand tubes, dummy plugs, new oil cooler, egr work, and a tune. We work on all sorts of diesels, just give us a call!

2005 Chev Duramax, Customer came in for rear differential intermittent engagement issues, upon tear down found some broken teeth in the factory locker assembly. Time for an upgrade!! Yukon gears locker assembly and new bearings going in! #yukongears #wallsrodandcustom #duramax #chevrolet

Today's project. New PDM relocate kit, new injection pump, and a rebuilt 4L80.

Engine espar install on a 2011 Ford F-250. Should help it start nicely during our cold winters.

6.0L Ford engine swap, new turbo, egr delete, and tune. Always busy here.

This gorgeous challenger stopped by for a mid-winter dyno session. Made some decent numbers for a little 340.

Head gasket job on a LMM duramax. Always busy here at the shop!

Another successful dyno day finished! Thank you to all that came out. It was a blast. Now it's time to get working on the trucks and build them up for the next dyno session in spring!