All Clear Disinfecting
2 Westdale Avenue N6J 2G6 London, ON, Canada

Our team recently completed another monthly treatment of 240,000 square feet of space for a manufacturing client. This treatment included an application of a long-lasting antimicrobial product every 30 days. ATP results were taken before each treatment to identify levels of contamination before disinfecting again. 400 ATP tests and 9 months later we were able to maintain an average reading of 65 RLU across their high touch surfaces, which is considered clean. Most importantly the surfaces stay continually disinfected during the entire work shift, not just for a few minutes after cleaning. If your organization is looking for a proactive solution to prevent the spread of pathogens throughout your facility keep long lasting antimicrobial products in mind.

This is why we use SteraMist as a key part of our protocol. https://www.facebook.com//a.64688684866/4326663754016782/

We recently completed a 28 day assessment on the effectiveness of the long lasting antimicrobial product we use in a semi lease and repair shop. We completed 12 ATP samples throughout the facility. Our high result was 640 and our low result was 16 with an average reading of 168. Four weeks later we tested the same surfaces before our treatment to show how well the long lasting antimicrobial is working. Our high result was 59 and our low result was 5 with an average read...ing of 23. This is a decrease of 86% after just one application. This means a safer environment for their employees at a reasonable cost they can afford.

One month ago we performed a disinfecting treatment for one of our customers that assembles vehicles parts for a defence manufacturer. Part of that treatment was an application of Shield 365 long lasting antimicrobial. To verify the efficacy of our treatment we took ATP samples on 12 high touch surfaces as a baseline reading. The highest value was 1391 RLU and the lowest value was 66 RLU with an average ATP reading of 507 RLU. It is important to note that, before we work... with this client, they had a disinfecting company come in on a monthly basis to disinfect their facility using a hospital grade broadband disinfectant. Upon completion of our treatment we performed ATP testing on the same 12 surfaces with a high reading of 36 RLU and a low reading of 0 RLU. 28 days later we came back to perform a high touch cleaning treatment using a special cleaner that leaves the surfaces clean and maintains the long lasting antimicrobial application. Before this treatment we performed ATP samples, on the same 12 high touch points, to verify that our long lasting antimicrobial treatment is working. The highest value was 194 RLU and the lowest value was 4 RLU with an average ATP reading of 41 RLU. Overall we were able to decrease contamination by 92%. This is a significant continuous decrease that will help them prevent an outbreak in their facility.

Since April we have been working with a metal supply company that has a combination of office space, production area, and fleet vehicles. We enhanced their infection control plan by introducing a hand sanitizer with longevity and a long-lasting antimicrobial disinfectant. By doing this we control person-to-person transmission and person-to-surface-to-person transmission. To date we have seen a 90% reduction in contamination throughout their facility, verified by ATP, and ...eliminated results with excessive contamination which helps to prevent an outbreak in their facility. #disinfecting #handsanitzer

Over the past 6 months, we have been working with a fastener and auto parts supplier to control contamination levels in their facility. By incorporating persistent disinfecting products into their cleaning plan we have been able to reduce their contamination levels, measured by ATP, by 69% and eliminate any high readings that would be considered at risk for spreading contamination that potentially leads to an outbreak in their facility.

We are happy to be adding PurAyr technology to our services. PurAyr Technology is a proven technology in the elimination of odours, viruses, bacteria, and mold. Whether it's skin, surfaces, or air we have industry-leading solutions to your disinfecting needs.

Our team recently completed another monthly treatment of 240,000 square feet of space for a manufacturing client. This treatment included an application of a long-lasting antimicrobial product every 30 days. ATP results were taken before each treatment to identify levels of contamination before disinfecting again. 400 ATP tests and 9 months later we were able to maintain an average reading of 65 RLU across their high touch surfaces, which is considered clean. Most importantly the surfaces stay continually disinfected during the entire work shift, not just for a few minutes after cleaning. If your organization is looking for a proactive solution to prevent the spread of pathogens throughout your facility keep long lasting antimicrobial products in mind.

This is why we use SteraMist as a key part of our protocol. https://www.facebook.com//a.64688684866/4326663754016782/

We recently completed a 28 day assessment on the effectiveness of the long lasting antimicrobial product we use in a semi lease and repair shop. We completed 12 ATP samples throughout the facility. Our high result was 640 and our low result was 16 with an average reading of 168. Four weeks later we tested the same surfaces before our treatment to show how well the long lasting antimicrobial is working. Our high result was 59 and our low result was 5 with an average read...ing of 23. This is a decrease of 86% after just one application. This means a safer environment for their employees at a reasonable cost they can afford.

One month ago we performed a disinfecting treatment for one of our customers that assembles vehicles parts for a defence manufacturer. Part of that treatment was an application of Shield 365 long lasting antimicrobial. To verify the efficacy of our treatment we took ATP samples on 12 high touch surfaces as a baseline reading. The highest value was 1391 RLU and the lowest value was 66 RLU with an average ATP reading of 507 RLU. It is important to note that, before we work... with this client, they had a disinfecting company come in on a monthly basis to disinfect their facility using a hospital grade broadband disinfectant. Upon completion of our treatment we performed ATP testing on the same 12 surfaces with a high reading of 36 RLU and a low reading of 0 RLU. 28 days later we came back to perform a high touch cleaning treatment using a special cleaner that leaves the surfaces clean and maintains the long lasting antimicrobial application. Before this treatment we performed ATP samples, on the same 12 high touch points, to verify that our long lasting antimicrobial treatment is working. The highest value was 194 RLU and the lowest value was 4 RLU with an average ATP reading of 41 RLU. Overall we were able to decrease contamination by 92%. This is a significant continuous decrease that will help them prevent an outbreak in their facility.

This is where the use of a long lasting antimicrobial can improve any disinfecting plan. https://www.cbc.ca//marketplace-supermarket-germs-1.5778492

When our crew is on site our focus is to disinfect those surfaces which are often missed. To clean for infection prevention instead of just for visual appeal. This is why our customers trust us to treat over 3 million square feet per month.

This is why we encourage the use of alcohol free, dermatologically tested hand sanitizers with Health Canada Registration. https://www.cbc.ca//sanitizer-recall-expands-canada-1.5675

We are happy to be adding PurAyr technology to our services. PurAyr Technology is a proven technology in the elimination of odours, viruses, bacteria, and mold. Whether it's skin, surfaces, or air we have industry-leading solutions to your disinfecting needs.

Emergency COVID decontamination. No problem. All Clear is on the way. 24/7 emergency response.

This is a really good article explaining which environments pose the highest risks of an outbreak. https://www.erinbromage.com//the-risks-know-them-avoid-them

Here’s a video that explains how our long lasting antimicrobial barrier works. https://youtu.be/jDgtxaKdfIY

Another attic saved.

Dry fogging with some hypochlorous acid. https://youtu.be/CRMXFgiNqPE

Yesterday we helped a golf course get their golf cart fleet ready for the season. https://youtu.be/2Xh5M7zYOZE

Here we are dry fogging a truck with hypochlorous acid.

Episode 4: Microwave We tested a microwave in a rental suite between tenants.

Episode 3: Hair Dryer & A/C Switch https://youtu.be/E26k5ByxydM

http://investor.tomimist.com/prviewer/release_only//4302804

Episode 2: Today we test a keyboard and a phone. https://youtu.be/ozNRUfPQ6Rs

Episode 1 of our new series where we test surfaces with an ATP meter and determine what levels of contamination exist on those surfaces. Really useful information that you can use to keep yourself, and others, safe during this outbreak. https://youtu.be/Db3UGaegzUs